Product Description
CHINAMFG Machinery specializes in power transmission components.
1. Keyless Locking Devices,
2. Timing Belt Pulleys,
3. Nylon Sleeve Couplings,
4. Jaw Couplings,
5. Shaft Collars; Fixing Collar,
6. Spur Gears and other parts,
7. Torque Limiters,
8. Mechanical Parts made-to-order
· Ubet Keyless Locking Devices are used in rotating machinery, producing clamping pressure between surface of locking device and shaft to create adjustable and releasable mechanical connection, so as to clamp gears, pulleys and other components to a shaft without threads or keys.
Materials of CHINAMFG Locking Device are available in:
Carbon Steel S45C, C45E, 1045, 40Cr, 42CrMo4V
Stainless Steel AISI431, AISI304
· Ubet Machinery Timing Belt Pulleys and Toothed Bars/ Timing Bars.
Standard and non-standard pulleys according to drawings are available.
Materials of CHINAMFG Timing Belt Pulleys are available in:
AlCuMgPb 6061 6082 Aluminum Timing Pulley
C45E 1045 S45C Carbon Steel Timing Pulley
GG25 HT250 Cast Iron Timing Pulley
SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
Other material on demand, such as cooper, bronze and plastic
· Ubet Jaw couplings are designed as 3 piece combination, including 2 hubs and 1 elastomer made of polyurethane. The curved jaw fits CHINAMFG the spider, which minimizes shock to the motor and other sensitive equipment.
Material: Alluminum for size below 42
Steel for size over 42
Finish: Natural or Anodizing
Size Range: 19 to 75
Finished bore: according to ISO fit H7
Keyway width: according to DIN 6885/1
The Tolerance of keyway is Js9
| Process | Equipment | Precision Degree | Machining range |
| Blank Making | Resin bonded sand production line;Vertical parting flaskless molding line,146 opening production line;Electric furnace; CHINAMFG cupola; Guillotine shear,Punching machine; Forge rolling machine; Precision die forging machine; | precision cast; precision forging; precision molding | All sorts of casting and forging parts |
| Heat Treatment | Vertical furnace; Speckled furnace;High frequency quenching furnace | Material hardness transformation≤HRC1 | Hardening and Tempering; Quenching; High frequency quenching; Carburizing and quenching |
| Machining | Precise NC machine | Dimesion tolerance 6 degree; Roughness Ra0.8; Roundness,straightness and concentricity accuracy≤0.01mm | inner hole≥5mm, outside diameter ≤800mm |
| Grinding machining | NC excircle grinding machine; Surface grinding machine | Dimesion precision 5 degree; Roughness Ra0.4 | Outside diameter 3mm to 320mm |
| Teeth-profile Making | NC gear hobbing maching; gear slotting machine | Roughness Ra1.6; Concentricity 0.05 | Maximum module M=10, OD≤1800mm |
| Hobbing and drilling | CNC machine;drilling machine;NC milling machine | Hole dimesion tolerance 6 degree; positioning accuracy 0.05 | Workbench leghth 1650mm; width 852mm; minimum diameter 1mm |
| Other Machining | Hydraulic broaching machine; sawing machine; punching machine; lather labeling machine | keyway tolerance 7 degree; symmetry degree 0.05 | spline; straight keyway; spline keyway |
| Surface Treatment | polishing machine; plating production line; spray-painting line;coating line;oxidizing line; phosphating line | In accordance with European standard RoHS. | Surface polishing; Cr6+free zinc plating,Nickle hard chromium; Decorative chrome plating;Nickle;Paiting; phosphating; Anodizing;blackening;Dacrotized |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO |
|---|---|
| Pulley Sizes: | Timing |
| Manufacturing Process: | Sawing |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are some real-world examples of HTD pulley applications in various industries?
HTD pulleys find extensive applications in various industries, enabling efficient power transmission, precise motion control, and reliable performance. Here are some real-world examples of HTD pulley applications in different industries:
1. Automotive Industry:
In the automotive industry, HTD pulleys are used in engine systems, timing belts, and accessory drives. They drive components such as water pumps, alternators, power steering pumps, and air conditioning compressors. The pulleys assist in synchronizing the engine’s valves and camshafts, ensuring precise timing and efficient combustion. HTD pulleys also contribute to the smooth operation of various vehicle systems, enhancing overall performance and reliability.
2. Industrial Automation:
In industrial automation, HTD pulleys are employed in conveyor systems, robotic arms, and material handling equipment. They enable the precise movement and positioning of components, facilitating efficient production processes and assembly lines. HTD pulleys contribute to the automation and synchronization of various industrial tasks, ensuring accurate and reliable operation in industries such as manufacturing, logistics, and warehousing.
3. Medical and Laboratory Equipment:
HTD pulleys play a vital role in medical and laboratory equipment, including centrifuges, liquid handling systems, robotic systems, and imaging devices. They facilitate precise sample handling, fluid pumping, robotic motion control, and imaging system positioning. HTD pulleys contribute to the automation, accuracy, and reliability of medical diagnostics, laboratory research, and clinical procedures, improving patient care and scientific advancements.
4. Printing and Packaging:
In the printing and packaging industry, HTD pulleys are utilized in printing presses, label applicators, and packaging machines. They drive the movement of paper or packaging materials, ensuring accurate feeding, cutting, and positioning. HTD pulleys contribute to high-speed printing and packaging processes, maintaining tight registration and delivering consistent quality output in industries such as commercial printing, labeling, and packaging manufacturing.
5. Textile Machinery:
HTD pulleys are extensively used in textile machinery, including spinning machines, weaving looms, and knitting machines. They drive the rotation of spindles, bobbins, and other components involved in yarn production, fabric formation, and textile processing. HTD pulleys enable precise control over the speed and tension of yarns, contributing to the efficiency and quality of textile manufacturing processes.
6. Agricultural Equipment:
In the agricultural sector, HTD pulleys are employed in various equipment such as combine harvesters, seeders, and irrigation systems. They drive the movement of components like conveyor belts, augers, and pumps, facilitating tasks such as crop harvesting, seed distribution, and water supply. HTD pulleys contribute to the reliable and efficient operation of agricultural machinery, enhancing productivity in farming and crop management.
7. Renewable Energy:
HTD pulleys are utilized in renewable energy systems such as wind turbines and solar trackers. They enable the rotation and positioning of turbine blades or solar panels, optimizing energy capture and conversion. HTD pulleys contribute to the efficient harnessing of wind and solar power, promoting sustainable energy generation and reducing reliance on fossil fuels.
8. Fitness Equipment:
In the fitness industry, HTD pulleys are employed in exercise machines, treadmills, and weightlifting equipment. They drive the movement of resistance mechanisms, pulley systems, and adjustable components, enabling users to perform various exercises and adjust resistance levels. HTD pulleys contribute to smooth and controlled motion, enhancing the functionality and effectiveness of fitness equipment.
These are just a few examples of how HTD pulleys are used in various industries. Their versatility, reliability, and precise motion control make them a valuable component in a wide range of applications, contributing to improved efficiency and performance across different sectors.
What maintenance procedures are necessary to ensure the reliability of HTD pulleys?
To ensure the reliability and optimal performance of HTD pulleys, several maintenance procedures should be followed. These procedures help identify and address potential issues, prevent premature wear or failure, and extend the lifespan of the pulleys. Here’s a detailed explanation of the necessary maintenance procedures for HTD pulleys:
1. Regular Inspection:
Regular inspections are essential to identify any signs of wear, damage, or misalignment in HTD pulleys. Inspect the pulleys visually, looking for cracks, chips, or deformations. Check the teeth for excessive wear or damage. Ensure that the pulleys are properly aligned and that there are no signs of excessive vibration or noise during operation. Regular inspections allow for early detection of potential problems, enabling timely maintenance or replacement of the pulleys to prevent further damage or failures.
2. Belt Tension Checks:
Proper belt tension is crucial for the reliable operation of HTD pulleys. Insufficient tension can cause belt slippage, while excessive tension can lead to premature wear on the pulleys and belts. Regularly check the belt tension using appropriate tensioning tools or methods recommended by the pulley manufacturer. Adjust the tension as needed to ensure it falls within the specified range. Maintaining the correct belt tension helps optimize power transmission, reduce wear, and prevent belt failure.
3. Lubrication:
Lubrication is important for reducing friction and wear in HTD pulleys. Some pulleys may require periodic lubrication of the bearings or bushings to ensure smooth operation. Consult the manufacturer’s guidelines to determine the appropriate lubrication intervals and the type of lubricant to use. Apply the lubricant as recommended, taking care not to over-lubricate. Proper lubrication helps minimize friction and heat generation, extending the lifespan of the pulleys and ensuring reliable performance.
4. Alignment:
Proper alignment of HTD pulleys is crucial for their reliability. Misalignment can cause premature wear on the belts, pulleys, and bearings, leading to reduced performance and potential failures. Regularly check the alignment of the pulleys using alignment tools or methods recommended by the manufacturer. Adjust the pulley positions as necessary to ensure proper alignment. Proper alignment ensures efficient power transmission, reduces wear, and minimizes the risk of belt slippage or premature failure.
5. Cleaning:
Keeping HTD pulleys clean is important for their reliable operation. Regularly clean the pulleys to remove dust, debris, or other contaminants that can accumulate on the pulley surfaces or teeth. Use a soft brush or cloth to gently clean the pulleys, taking care not to damage the teeth or other delicate parts. Avoid using harsh chemicals that can degrade the pulley material. Clean pulleys contribute to improved belt traction, reduced wear, and enhanced overall reliability.
6. Replacement of Worn or Damaged Components:
If any HTD pulley components, such as the pulleys themselves or the belts, are worn, damaged, or nearing the end of their lifespan, they should be replaced promptly. Worn or damaged pulleys can compromise the performance and reliability of the entire system. Follow the manufacturer’s recommendations for replacement parts and ensure that the new components meet the required specifications. Timely replacement of worn or damaged components helps maintain the reliability and longevity of HTD pulleys.
7. Follow Manufacturer’s Guidelines:
Lastly, it is important to follow the specific maintenance guidelines provided by the HTD pulley manufacturer. Different pulley designs and materials may require specific maintenance procedures or intervals. Consult the manufacturer’s documentation for detailed instructions on maintenance, lubrication, inspection, and any other relevant procedures. Adhering to the manufacturer’s guidelines ensures that the pulleys are maintained correctly and maximizes their reliability and performance.
In summary, to ensure the reliability of HTD pulleys, regular inspections, belt tension checks, lubrication, alignment, cleaning, replacement of worn components, and adherence to the manufacturer’s guidelines are necessary. By following these maintenance procedures, the lifespan of HTD pulleys can be extended, and their reliable operation can be ensured, minimizing downtime and optimizing the performance of the systems in which they are used.
What are the advantages of using HTD pulleys for timing and synchronous belt systems?
Using HTD pulleys in timing and synchronous belt systems offers several advantages. Here’s a detailed explanation of the benefits of using HTD pulleys in these systems:
1. Accurate Timing and Synchronization:
HTD pulleys are designed to provide precise timing and synchronization in timing belt systems. The tooth profile of HTD pulleys matches the tooth profile of HTD belts, ensuring accurate engagement and transfer of rotational motion. This precise timing and synchronization are crucial in applications where multiple components need to work together, such as in robotics, automation, and CNC machines. HTD pulleys help maintain consistent motion control and prevent timing errors, resulting in improved system performance and reliability.
2. Efficient Power Transmission:
HTD pulleys contribute to efficient power transmission in timing and synchronous belt systems. The trapezoidal tooth profile of HTD pulleys allows for a larger contact area between the pulley and the belt compared to other pulley types. This increased contact area improves power transfer efficiency by reducing the concentration of forces on individual teeth. It minimizes slippage and ensures a reliable transfer of power from the pulley to the belt, maximizing energy transmission and system efficiency.
3. Reduced Backlash:
Backlash, which refers to the slight movement or play between the teeth of a pulley and the corresponding belt, can negatively impact system performance. HTD pulleys are designed to minimize backlash, ensuring precise motion control and power transmission. By reducing backlash, HTD pulleys minimize energy losses and improve the overall efficiency of the system. They help maintain accurate positioning and prevent undesired motion or vibration, particularly in applications requiring precise synchronization and control.
4. Noise Reduction:
HTD pulleys and belts are known for their quiet operation. The accurate tooth engagement and reduced backlash characteristic of HTD pulleys contribute to a smoother and quieter system. The trapezoidal tooth profile minimizes noise generation during operation, resulting in a quieter working environment. This is particularly advantageous in applications where noise reduction is essential, such as in office equipment, medical devices, and consumer electronics.
5. Versatility and Availability:
HTD pulleys are available in a wide range of sizes, configurations, and materials to suit various application requirements. They can accommodate different belt widths and power transmission needs. The availability of HTD pulleys in the market makes them easily accessible for system design and integration. Their versatility allows for flexibility in designing timing and synchronous belt systems for different industries and applications.
6. Durability and Reliability:
HTD pulleys are designed to be durable and reliable. They are constructed using high-quality materials such as aluminum, steel, or plastic, depending on the application requirements. These materials provide strength, resistance to wear, and corrosion protection. HTD pulleys are designed to withstand demanding operating conditions and offer long service life, reducing maintenance needs and ensuring system reliability.
In summary, using HTD pulleys in timing and synchronous belt systems provides advantages such as accurate timing and synchronization, efficient power transmission, reduced backlash, noise reduction, versatility, and durability. These benefits contribute to improved system performance, energy efficiency, and overall reliability in various applications across industries.
editor by CX
2024-03-15